User Safety
Phaser® 6180MFP Multifunction Printer
1-7
■ Always use three people to lift the printer.
■ Always lift the printer from the designated lift points.
■ Carry the printer without tilting it.
Caution: Do not tilt the printer more than 10 degrees to the front/back or right/left.
Tilting more than 10 degrees may lead to consumables inside the printer spilling out.
Note: The rear side of this printer is heavier than the front. Be aware of this weight
difference when moving the printer.
■ Do not place any food or liquids on the printer.
Caution: Damage to the printer resulting from improper moving or failure to repackage the
printer properly for shipment, is not covered by the warranty, service agreement, or Total
Satisfaction Guarantee. The Total Satisfaction Guarantee is available in the United States and
Canada. Coverage may vary outside these areas; please contact your local representative for
details.
See also:
Moving the Printer on page 11-11
6180mfp-042
To Next Page
Loading...
Need help?
General
