Xerox Phaser 6180MFP User Manual

Print Quality
Phaser® 6180MFP Multifunction Printer
10-20
Print Quality
This section includes:
■ Print-Quality Problems on page 10-20
■ Copy-Quality Problems on page 10-24
■ Color Registration on page 10-25
Print-Quality Problems
When the print quality is poor, select the closest symptom from the following table to correct
the problem.
If the print quality does not improve after carrying out the appropriate action, contact Xerox
Customer Support or your reseller.
Symptom Reason/Action
Faded printouts Multiple colors faded:
■ The print cartridges are not Xerox print cartridges.
Verify that the print cartridges (C/M/Y/K) are genuine Xerox cartridges,
and replace if necessary.
■ The paper is outside the recommended specification range.
Replace the media with a recommend size and type, and confirm that
your control panel settings are correct. See About Paper on page 5-6.
■ The paper is damp.
Replace the paper. See About Paper on page 5-6.
■ The transfer unit is old or damaged.
Replace the transfer unit.
■ The high-voltage supply is defective.
For assistance, go to the Xerox Support website:
w
ww.xerox.com/office/6180MFPsupport.
Only one color faded:
Check the condition of the print cartridge, and replace as necessary.

Xerox Phaser 6180MFP Specifications

General

Brand	Xerox
Model	Phaser 6180MFP
Category	All in One Printer
Language	English