Adjusting Copying Options
Phaser® 6180MFP Multifunction Printer
6-9
8. Press the OK button to accept the new setting.
9. You can select another color and adjust it’s density, or press the Exit button to leave this
portion of the menu.
To adjust the Color Balance default setting, see Selecting the Default Copy Settings on
page 6-5.
Image Placement Adjustments
You can change the following image placement adjustment settings:
â– Printing Multiple Images on a Sheet (N-Up) on page 6-9
â– Printing Posters on page 6-10
â– Repeating Images on a Sheet on page 6-10
â– Centering the Image on page 6-10
â– Setting the Copy Margins on page 6-11
Printing Multiple Images on a Sheet (N-Up)
You can copy two original page images onto one side of a sheet of paper. The size of the
images are reduced proportionally to fit on the selected paper.
To select the N-Up option:
1. On the control panel, press the Copy button.
2. Select
N-Up, and then press the OK button.
3. Select one of the following options, and then press the OK button.
4. Press the Start button to begin copying.
Off
Copies one original page image onto one side of a sheet of paper.
Auto
Copies two original pages, reduces the images, and prints them on one
side of a sheet of paper.
ID Copy
Copies two original size images onto one side of a sheet of paper.
Manual
Reduces the two original images as specified in Reduce/Enlarge, and
prints them on one side of a sheet of paper.
To Next Page
Loading...
Need help?
General
