Cleaning the Printer
Phaser® 6180MFP Multifunction Printer
11-3
Cleaning the Interior
After clearing paper jams or replacing the print cartridge, inspect the inside of the printer
before closing the printer covers.
Warning: Never touch a labeled area found on or near the heat roller in the fuser. You can get
burned. If a sheet of paper is wrapped around the heat roller, do not try to remove it by yourself
to avoid injuries or burns. Switch off the printer immediately. Go to the Xerox Support
website,
www.xerox.com/office/6180MFPsupport.
■ Remove any remaining pieces of paper.
■ Remove any dust or stains with a dry clean cloth.
To Next Page
Loading...
