Xerox Phaser 6180MFP User Manual

Moving the Printer
Phaser® 6180MFP Multifunction Printer
11-11
Moving the Printer
Use the following procedure when moving the printer.
To view precautions and guidelines for safely moving your printer, see User Safety on
page 1-2.
The printer, configured with the optional accessories, paper trays, consumables and paper,
weighs 41 kg (90 lb.). When moving the equipment, make sure that there are two or more
persons carrying it.
When lifting the printer, be sure to observe the following points. Failure to do so may cause the
printer to fall and result in injuries.
Two persons, one facing the front of the printer (control panel) and the other facing the back,
should firmly grip the recessed areas on the bottom part of both sides of the printer. Never try
to lift the printer by gripping any other areas.
Note: The front side of this printer is heavier than the rear. Take note of this difference in
weight when moving the printer.
6180mfp-043
41 kg
90 lb.

Xerox Phaser 6180MFP Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Duplex Printing	Manual
Scan Type	Flatbed, ADF
Fax Capability	Yes
Fax Transmission Speed	33.6 Kbps
Standard Paper Capacity	250 sheets
Maximum Paper Capacity	500 sheets
Max Paper Size	8.5 x 14 in
Connectivity	USB 2.0, Ethernet
Scan Resolution	1200 x 1200 dpi
Supported Paper Sizes	Letter, Legal, Executive, A4, A5, B5
Operating System Compatibility	Windows, Mac OS, Linux
Maximum Print Resolution	600 x 600 dpi