Printing on Both Sides of the Paper
Phaser® 6180MFP Multifunction Printer
5-23
Printing on Both Sides of the Paper
This section includes:
■ Automatic 2-Sided Printing Guidelines on page 5-23
■ Binding Edge Options on page 5-24
■ Selecting 2-Sided Printing on page 5-24
Note: For information about manual two-sided printing, go to the Online Support Assistant at
www.xerox.com/office/6180MFPsupport.
Automatic 2-Sided Printing Guidelines
Automatic 2-sided printing is available from the Phaser 6180MFP-DN configuration. A
Duplex Unit is available as an option for the Phaser 6180MFP-N configuration. Before
printing a 2-sided document, verify that the paper is a supported size for the tray. For a list of
supported paper sizes, see Supported Paper and Media on page 5-2. The following paper and
media cannot be used for 2-sided printing:
■ Transparencies
■ Envelopes
■ Labels
■ Any die-cut specialty media, such as business cards
■ Thick card stock
■ Thick glossy card stock
See also:
2-Sided Printing Paper Types and Sizes on page 5-8
Supported Paper and Media on page 5-2
To Next Page
Loading...
