Xerox Phaser 6180MFP User Manual

Configuring the Network Address
Phaser® 6180MFP Multifunction Printer
4-7
Dynamic Methods of Setting the Printer’s IP Address
There are two protocols available for dynamically setting the printer’s IP address:
■ DHCP (enabled by default on all Phaser printers)
■ AutoIP
You can turn on/off both protocols using the control panel, or use CentreWare IS to turn on/off
DHCP.
Note: You can print a report that includes the printer’s IP address. On the control panel, press
the System button, select
Information Pages, press the OK button, select Configuration, and
then press the OK
button. The IP address is listed on the Configuration report.
Using the Control Panel
To turn on/off either the DHCP or AutoIP protocol:
1. On the control panel, press the System button.
2. Select the
Admin menu, and then press the OK button.
3. Select the
Network Settings menu, and then press the OK button.
4. Select the
TCP/IP menu, and then press the OK button.
5. Select
Get IP Address, and then press the OK button.
Using CentreWare IS
To turn on/off the DHCP protocol:
1. Launch your web browser.
2. Enter the printer’s IP address in the browser’s Address field.
3. Select Properties.
4. Select the Protocols folder on the left navigation panel.
5. Select TCP/IP.
6. In the Get IP Address field, select the DHCP/Autonet option.
7. Click the Save Changes button.

Xerox Phaser 6180MFP Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Duplex Printing	Manual
Scan Type	Flatbed, ADF
Fax Capability	Yes
Fax Transmission Speed	33.6 Kbps
Standard Paper Capacity	250 sheets
Maximum Paper Capacity	500 sheets
Max Paper Size	8.5 x 14 in
Connectivity	USB 2.0, Ethernet
Scan Resolution	1200 x 1200 dpi
Supported Paper Sizes	Letter, Legal, Executive, A4, A5, B5
Operating System Compatibility	Windows, Mac OS, Linux
Maximum Print Resolution	600 x 600 dpi