Xerox Phaser 6180MFP - Scan Defaults Menu; Fax Defaults Menu

Description of Menu Items
Phaser® 6180MFP Multifunction Printer
9-5
Scan Defaults Menu
■ Scan to Network: Selects the scan destination.
■ File Format: Selects the file type of the scanned image.
■ Color: Selects the color mode, either color or black and white.
■ Resolution: Selects the scan resolution.
■ Document Type: Specifies the type of document to be scanned. Either text, text and
photographs, or photograph.
■ Document Size: Specifies the size of the original document.
■ Lighten/Darken: Lightens or darkens the scanned image.
■ Sharpness: Specifies the sharpness of the scanned image.
■ Contrast: Specifies the contrast of the scanned image.
■ Auto Exposure: Turns Auto Exposure on and off when scanning. Auto Exposure
suppresses the document background of off-white colored paper. It also helps suppress
show-through when copying double-sided thin paper.
■ Auto Expo. Level: Adjusts the level of the auto exposure functionality.
■ TIFF File Format: Sets the TIFF file format: TIFF V6 or TTN2.
■ Image Compression: Specifies the amount of image compression: Lower, Normal, or
Higher.
■ Max E-Mail Size: Sets limits on the size of attachments that can be emailed. The range is
selectable from 50 to 16384 kb.
Fax Defaults Menu
■ Color: Specifies the color mode, either color or black and white.
■ Resolution: Specifies the resolution of the fax.
■ Document Type: Specifies the type of document to be scanned. Either text, text and
photographs, or photograph.
■ Lighten/Darken: Lightens or darkens the scanned image.
■ Delayed Start: Specifies the time delay before sending a fax job. Up to 23 hours and 59
minutes can be specified for the delay.