Xerox Phaser 6180MFP User Manual

Control Panel Error Messages
Phaser® 6180MFP Multifunction Printer
10-33
XXX indicates one of the following: the Yellow Toner (Y), Cyan Toner (C), Magenta Toner (M),
Black Toner (K), or fuser.
NNN indicates a numeric value.
Ready to Print
XXX Cartridge
Replace Soon
The XXX print cartridge is nearly empty.
Purchase a new print cartridge.
See Checking or Managing the Printer with CentreWare IS on
page 11-6.
Ready to Print
Replace(010-421)
It is nearly time to replace the fuser.
Purchase a new fuser.
Ready to Print
Transfer Unit
Replace Soon
It is nearly time to replace the transfer unit.
Purchase a new transfer unit.
Reboot Printer
NNN-NNN
The fuser is not installed correctly or is not working correctly due
to damage or malfunction.
Reinstall the fuser.
Remove Tape
XXX Cartridge
The print cartridge is installed with the sealing tape attached.
Remove the tape from the print cartridge.
Replace XXX
Print Cartridge
The print cartridge has become empty.
Replace the old print cartridge with a new one.
Replace
Transfer Unit
Time to replace the transfer unit.
Replace the old transfer unit with a new one.
Message Condition/Reason/Action

Xerox Phaser 6180MFP Specifications

General

Print Technology	Laser
Functions	Print, Copy, Scan, Fax
Duplex Printing	Manual
Scan Type	Flatbed, ADF
Fax Capability	Yes
Fax Transmission Speed	33.6 Kbps
Standard Paper Capacity	250 sheets
Maximum Paper Capacity	500 sheets
Max Paper Size	8.5 x 14 in
Connectivity	USB 2.0, Ethernet
Scan Resolution	1200 x 1200 dpi
Supported Paper Sizes	Letter, Legal, Executive, A4, A5, B5
Operating System Compatibility	Windows, Mac OS, Linux
Maximum Print Resolution	600 x 600 dpi