Xerox WorkCentre 5020 System Administrator Guide

8 Accounting and Securities
72
Resetting the Total Number of Copies and Prints for All Users
The following describes how to reset the copy and print totals for all user accounts in a
single operation.
At the Machine
1. Enter the System Setting Mode.
The letter [P] appears blinking in the Display.
NOTE: For information on how to enter the System Setting Mode, refer to
Entering the
System Setting Mode on page 109
.
2. Enter a menu number [398] using the numeric keypad.
3. Press the <Start> button to confirm the entered menu number.
4. Enter “0” using the numeric keypad.
5. Press the <Start> button to confirm the entered value.
All counters for all user accounts are reset to “0”.
6. Press the <Log In/Out> button.
The machine exits the System Setting Mode.
NOTE: If you have changed any settings in the System Setting Mode, the machine will
automatically reboot to register and enable the new settings. All scanned documents
stored in mailboxes will be deleted on the reboot.

Xerox WorkCentre 5020 Specifications

General

Print Technology	Laser
Print Speed	Up to 20 ppm
Print Resolution	Up to 600 x 600 dpi
Max Paper Size	A3
Standard Paper Capacity	250 sheets
Bypass Tray Capacity	100 sheets
Duplex Printing	Manual
Copy Speed	Up to 20 cpm
First Page Out Time (Copying)	Less than 10 seconds
Scan Resolution	Up to 600 x 600 dpi
Operating System Compatibility	Windows, Mac OS
Automatic Document Feeder	50 sheets
Connectivity	USB 2.0
Functions	Print, Copy
Reduction / Enlargement	25% - 400%
Scan Destinations	USB, Email
Fax Transmission Speed	33.6 kbps
First Page Out Time (Printing)	Less than 8 seconds