Xerox WorkCentre 5020 System Administrator Guide

109
10 Appendix
This chapter provides the system settings menu list, machine specifications, optional
accessory list.
The following information is provided in this chapter:
System Settings – page 109
Specifications – page 122
Optional Accessories – page 125
System Settings
This section describes how to enter the System Setting Mode, and configure the
System Settings.
NOTE: If you have changed any settings in the System Setting Mode, the machine will
automatically reboot to register and enable the new settings. All scanned documents
stored in mailboxes will be deleted on the reboot.
Entering the System Setting Mode
The following describes how to enter the System Setting Mode.
Depending on whether Copy Auditron is enabled or disabled on the machine, the
procedure for entering the System Setting Mode differs.
For more information about Copy Auditron, refer to
Accounting and Securities on
page 65
.
If Copy Auditron is disabled
1. Hold down the <Log In/Out> button for
four seconds.
Hyphens appear blinking in the Display.
<Log In/Out>
button

Xerox WorkCentre 5020 Specifications

General

Print Technology	Laser
Print Speed	Up to 20 ppm
Print Resolution	Up to 600 x 600 dpi
Max Paper Size	A3
Standard Paper Capacity	250 sheets
Bypass Tray Capacity	100 sheets
Duplex Printing	Manual
Copy Speed	Up to 20 cpm
First Page Out Time (Copying)	Less than 10 seconds
Scan Resolution	Up to 600 x 600 dpi
Operating System Compatibility	Windows, Mac OS
Automatic Document Feeder	50 sheets
Connectivity	USB 2.0
Functions	Print, Copy
Reduction / Enlargement	25% - 400%
Scan Destinations	USB, Email
Fax Transmission Speed	33.6 kbps
First Page Out Time (Printing)	Less than 8 seconds