9 Problem Solving
98
4.
Remove the jammed paper.
NOTE: Do not leave any torn pieces of paper inside the machine.
1) If the paper is jammed in the
location shown in the diagram,
remove the jammed paper by
pulling it upwards.
2) If the paper is jammed in the
location shown in the diagram,
remove the jammed paper by
pulling it upwards.
3) If the paper is jammed in the
location shown in the diagram, and
if the edges of the jammed paper is
not accessible to be pulled out, pull
up the green lever, and remove the
jammed paper.
5.
Gently close the Left Side Cover,
Access Cover 2, and Access Cover 1.
C1: Paper Jam in Tray 1
The following procedure describes how to clear paper jams in Tray 1 when an error
code [C1] appears in the Display.
1.
Pull out Tray 1 toward you.
NOTE: Identify the location of the paper
jam first. Randomly pulling out the trays
may tear the jammed paper, and any torn
pieces of paper remaining in the machine
may eventually cause the machine to
malfunction.
2.
Remove the jammed paper.
NOTE: Do not leave any torn pieces of paper inside the machine.
3.
Check that the paper guides are adjusted correctly.
NOTE: If Tray 1 has run out of paper, load paper in the tray. For information on how to
load paper in Tray 1, refer to the User Guide
To Next Page
Loading...
