Xerox WorkCentre 5020 System Administrator Guide

Setting Up a Mailbox
63
Editing a Mailbox
The following procedure explains how to change mailbox settings.
NOTE: Some mailboxes may require you to enter a passcode depending on the
[Check Mailbox Passcode] setting on the [Mailbox Setup] page. For more information,
refer to
Creating a Mailbox on page 58 .
1. Click the [Scan] tab on the Header Panel of the CentreWare Internet Services
home page.
The [Mailbox] page is displayed.
2. Select the mailbox you want to edit, then click [Edit].
The [Edit Mailbox] page is displayed.
3. Change the settings as necessary.
4. Click [Apply].
Deleting a Mailbox
The following procedure explains how to delete a mailbox.
You can delete a mailbox selected on the [Mailbox] page. Before deleting a mailbox,
you need to delete all the documents in that mailbox. If the documents are stored in the
mailbox, the mailbox cannot be deleted. For information on how to delete documents
in a mailbox, refer to the User Guide.
1. Click the [Scan] tab on the Header Panel of the CentreWare Internet Services
home page.
The [Mailbox] page is displayed.
2. Select the mailbox that you want to delete, and click [Delete].
A confirmation message is displayed.
3. Click [OK].

Xerox WorkCentre 5020 Specifications

General

Print Technology	Laser
Print Speed	Up to 20 ppm
Print Resolution	Up to 600 x 600 dpi
Max Paper Size	A3
Standard Paper Capacity	250 sheets
Bypass Tray Capacity	100 sheets
Duplex Printing	Manual
Copy Speed	Up to 20 cpm
First Page Out Time (Copying)	Less than 10 seconds
Scan Resolution	Up to 600 x 600 dpi
Operating System Compatibility	Windows, Mac OS
Automatic Document Feeder	50 sheets
Connectivity	USB 2.0
Functions	Print, Copy
Reduction / Enlargement	25% - 400%
Scan Destinations	USB, Email
Fax Transmission Speed	33.6 kbps
First Page Out Time (Printing)	Less than 8 seconds