Xerox WorkCentre 5020 System Administrator Guide

10 Appendix
110
2. Enter the System Administrator’s ID
using a numeric keypad.
NOTE: The default System Administrator’s
ID is “11111”.
3. Press the <Start> button to confirm the
entered ID.
The machine enters the System Setting
Mode. The letter [P] appears blinking in
the Display.
If Copy Auditron is enabled
1. When Copy Auditron is enabled, [Id]
appears blinking in the Display. Enter
the System Administrator’s ID using the
numeric keypad.
NOTE: The default System Administrator’s
ID is “11111”.
2. Press the <Start> button to confirm the
entered ID.
• If the System Administrator’s
passcode is not set, the machine
enters the Copy Mode, and [1]
appears in the Display.
Proceed to Step 5.
NOTE: By default, the System
Administrator's passcode is not set.
Numeric keys
<Start> button
<Start> button

Xerox WorkCentre 5020 Specifications

General

Print Technology	Laser
Print Speed	Up to 20 ppm
Print Resolution	Up to 600 x 600 dpi
Max Paper Size	A3
Standard Paper Capacity	250 sheets
Bypass Tray Capacity	100 sheets
Duplex Printing	Manual
Copy Speed	Up to 20 cpm
First Page Out Time (Copying)	Less than 10 seconds
Scan Resolution	Up to 600 x 600 dpi
Operating System Compatibility	Windows, Mac OS
Automatic Document Feeder	50 sheets
Connectivity	USB 2.0
Functions	Print, Copy
Reduction / Enlargement	25% - 400%
Scan Destinations	USB, Email
Fax Transmission Speed	33.6 kbps
First Page Out Time (Printing)	Less than 8 seconds