Xerox WorkCentre 5020 System Administrator Guide

Paper Jams
95
If the paper is jammed around the Fuser
1) Pull down the latches.
2) Remove the jammed paper.
NOTE: Do not leave any torn pieces of
paper inside the machine.
3) Return the latches back to their
original position.
4) Gently close the Left Side Cover.
If the paper is jammed inside the Left Side Cover
1) If the paper is jammed in the
location shown in the diagram,
remove the jammed paper by
pulling it upwards.
2) If the paper is jammed in the
location shown in the diagram,
remove the jammed paper by
pulling it upwards.
3) If the paper is jammed in the
location shown in the diagram, and
if the edge of the jammed paper is
not accessible to be pulled out, pull
up the green lever, and remove the
jammed paper.
NOTE: If the paper is still jammed tightly,
even after pulling up the green lever, open
Access Cover 1. This may release the
jammed paper, allowing you to remove it.
4) Gently close the Left Side Cover.

Xerox WorkCentre 5020 Specifications

General

Print Technology	Laser
Print Speed	Up to 20 ppm
Print Resolution	Up to 600 x 600 dpi
Max Paper Size	A3
Standard Paper Capacity	250 sheets
Bypass Tray Capacity	100 sheets
Duplex Printing	Manual
Copy Speed	Up to 20 cpm
First Page Out Time (Copying)	Less than 10 seconds
Scan Resolution	Up to 600 x 600 dpi
Operating System Compatibility	Windows, Mac OS
Automatic Document Feeder	50 sheets
Connectivity	USB 2.0
Functions	Print, Copy
Reduction / Enlargement	25% - 400%
Scan Destinations	USB, Email
Fax Transmission Speed	33.6 kbps
First Page Out Time (Printing)	Less than 8 seconds