ADPRO Presidium by Xtralis Installation and User Manual
Doc. 12384_05 75
Note: Presidium Mini uses an internal hardware jumper to reset the unit to its factory
default password. Contact your local Xtralis representative for details.
4.6.5 HLI Connection to FastTrace Fails to Operate
Ensure the IP Address and Port Number programmed within the Presidium High Level Interface
(HLI) match the respective details within the FastTrace.
After programming and the physical network connection has been completed, re-power both the
FastTrace and the Presidium to restore the connection.
4.6.6 Presidium Setup Utility cannot be Started
If the Setup Utility is closed incorrectly, it will be left in a state where an error dialog will appear
when trying to restart. The error dialog box may indicate the Setup is already running.
To rectify this problem using Windows Explorer, navigate to the installation location. The default
is:
C:\Program Files\ADPRO\
Locate the file called Setup Utility 1.0pSU.lock and click DELETE.
The Setup Utility should now start correctly.
To Next Page
Loading...