YASKAWA SGDA series User Manual

4.2 Using the Functions
201
For JUSP-OP03A
1) Press
MODE/SET
to select the user constant
setting mode.
2) Press the
UP
and
DOWN
keys to select the
user constant number Cn-00.
(User constant Cn-00 is selected when the
power is turned ON.)
3) Press
DATA
to display the current data for
the user constant Cn-00.
4) Press the
UP
and
DOWN
keys to change the
data to 03.
5) Press
MODE/SET
to select the speed refer-
ence offset manual adjustment mode.
(The amount of speed reference offset is
displayed.)
6) Press the
UP
and
DOWN
keys to adjust the
amount of offset.
(Adjust the speed references.)
7) Press
MODE/SET
to return to the user
constant data display.
8) Press
DATA
to return to the setting mode
display. This ends the reference offset
manual adjustment.
4
JUSP-OP03A
Setting Mode
Select Cn-00.
User Constant Number Data
Set to 00-03.
Value changes
rapidly when
key held down.
Speed Reference Offset
Manual Adjustment Mode
Setting Mode Display

YASKAWA SGDA series Specifications

General

Brand	YASKAWA
Model	SGDA series
Category	Servo Drives
Language	English