8
If fine tuning of the frequency is necessary, press the
Key. The cursor will move from "damp" to
"freq". If fine-tuning is not necessary, skip step 9 and
go to step 10.
9
Select a digit with or Keys, and press the
or Keys to fine-tune the frequency.
10
Press Key to save the settings.
"DONE" will blink for two seconds and "RUN" will
be displayed.
11
Press the Key to complete the anti-resonance
control adjustment function. The screen in step 1 will
appear again.
Step Display after Operation Keys Operation
㧾㨁㧺㨂㨕㨎㧿㨡㨜
㨒㨞㨑㨝㧩㧜㧠㧜㧜㧴㨦
㨐㨍㨙㨜㧩㧜㧝㧞㧜
㧾㨁㧺㨂㨕㨎㧿㨡㨜
㨒㨞㨑㨝㧩㧜㧠㧜㧜㧴㨦
㨐㨍㨙㨜㧩㧜㧝㧞㧜
㧾㨁㧺㨂㨕㨎㧿㨡㨜
㨒㨞㨑㨝㧩㧜㧠㧜㧜㧴㨦
㨐㨍㨙㨜㧩㧜㧝㧞㧜
To Next Page
Loading...
Need help?
General
