2.7 Monitor Mode (Un)
The monitor mode can be used for monitoring the reference values, I/O signal status, and SERVOPACK inter-
nal status.
For details, refer to 8.2 Operation in Monitor Mode
The panel operator display numbers beginning with Un.
Display Example for Motor Speed
The example below shows how to display the contents of monitor number Un000.
Step
Display after
Operation
Keys Description
1 Press the MODE/SET Key to select the monitor mode.
2 Press the UP or the DOWN Key to select Un000.
3
Press the DATA/SHIFT Key for approximately one second
to display the data of Un000.
4
Press the DATA/SHIFT Key for approximately one second
to return to the display of monitor number (step 1).
To Next Page
Loading...
