TG Series User Guide
51/86
Email to SMS
To send Email to SMS, you need to configure Email SMTP settings and Email to SMS settings.
Configure Email SMTP Settings
Procedure
1. Navigate to SMS > SMS Settings > Email Settings.
2. Enter a valid email address in the Email Address field.
3. Enter the email password in the Password field.
4. Enter the SMTP Server and SMTP Port of the email.
5. (Optional) Enable SSL/TLS if the email server needs SSL/TLS authentication.
Note: If you use Gmail or Exchange server, enable the SSL/TLS.
6. Test if the email settings are correct.
a. Click Test SMTP Settings.
The following window appears.
b. Enter an email address to receive the test email.
c. Click Test SMT Settings.
The web page will prompt “Tested successfully” if the email settings are correct.
7. Click Save and Apply Changes.
Configure Email to SMS Settings
Procedure
1. Navigate to SMS > SMS Settings.
2. Check the checkbox of Email To SMS.
3. (Optional) configure the settings in the section of Email to SMS.
Enable Country Code: enable the option if you want to add the country code before the
destination phone number.
Receive Email Interval: set the interval of receiving emails from POP3 server.
Access Code: set a PIN code to verify emails. The users need to send emails with the
correct PIN code.
4. Click Save and Apply Changes.
To Next Page
Loading...
Need help?
General
