TG Series User Guide
23/86
3. Click Save and Apply Changes.
Configure the Call Duration of Mobile Trunks
You can limit call duration for each call of a mobile trunk or make a monthly talk plan for the mobile
trunk.
Note: the system starts to count the talk time when the SIM card is installed on the TG gateway. The
system doesn’t count the talk time that has been used formerly on the SIM card.
Set a Single Call Duration of Mobile Trunk
By default, the system doesn’t limit single call duration of mobile trunks. The default value of Single
Call Max Duration is 0. You can change the value to enable and define the maximum number of
minutes called within a single call.
Procedure
1. Navigate to Gateway > Mobile List > Mobile List, select the desired module, click .
2. On the General section, change the value of Single Call Max Duration.
To Next Page
Loading...
Need help?
General
