TG Series User Guide
52/86
Send Email to SMS
To send email to SMS, you need to send an email to the SMS email address of TG gateway. The
system will receive the email and forward the email to the GSM/3G port, so that the email can be
sent out through SMS to the expected destinations.
Sending Email to SMS, the format of the email subject is as below:
port:[port];num:[number];code:[code];
Format of the Email Subject
port:[port]: optional setting. If don’t specify a port, the TG gateway will send the SMS by the first
available GSM/3G port.
Example: port:3;
num:[number]: required setting. Enter the destination number.
Example: num:15882025100;
code:[code]: optional Setting. If you set an access code of Email To SMS, enter the same PIN
code in the email subject.
Example: code:125485;
Procedure
1. Log in your email account, compose a new email.
2. Enter the SMS email address of TG gateway as the destination email address.
3. Enter the email subject.
4. Send the email.
Example: the following figure indicates that the SMS email address is spbx@yeastar.com, and
the destination number is 15880290900.
Schedule SMS Clear Tasks
You can schedule clear task for messages in inbox and outbox. The system will clear all the
messages in the inbox or outbox periodically.
To Next Page
Loading...
Need help?
General
