Yeastar Technology TG200 User Manual

TG Series User Guide
53/86
Procedure
1. Navigate to SMS > SMS > SMS Clear Settings.
2. Set clear schedule for inbox or outbox.
a. Check the checkbox of SMS Clear Enabled.
b. (Optional) Set the Start Date and End Date. The system will clear the messages periodically
during this period.
c. Select the message Status. The system will delete the selected messages.
d. Set the clear period and clear time.
3. Click Save and Apply Changes.
Send USSD Messages
Unstructured Supplementary Service Data (USSD) is sometimes referred to as "Quick Codes" or
"Feature codes". You can send USSD messages to subscribe services from the GSM/3G carriers.
Send a USSD Message
You can choose a specific GSM/3G port, and send USSD messages to the GSM/3G carrier.
Procedure
1. Navigate to SMS > SMS > USSD.
2. Choose a port, enter the USSD messages in the USSD Request field.
3. Click Send.
Send USSD Messages in Bulk
You can send a USSD message for multiple GSM/3G ports in bulk.
Procedure
1. Navigate to SMS > SMS > USSD.
2. Selected the desired ports.
3. Enter the USSD message in blank field at the top left.

Yeastar Technology TG200 Specifications

General

Brand	Yeastar Technology
Model	TG200
Category	Network Router
Language	English