TG Series User Guide
28/86
4. Click Save and Apply Changes.
Configure SIM Card Forwarding and CLIR
You can set call forwarding and CLIR for your SIM cards on Yeastar TG gateway. TG gateway can
send service request to the SIM carrier to configure the call forwarding and CLIR settings.
Note: this feature should be supported by your SIM carrier.
Procedure
1. Navigate to Gateway > Mobile List > Mobile List, select the desired module, click .
2. Click the Call Control tab.
3. Enable the desired option and enter the number to receive forwarded calls.
4. If you forget the previous settings, click to retrieve the previous settings.
5. Click Save and Apply Changes.
Group Mobile Trunks
You can manage the mobile trunks efficiently by grouping the trunks. The group of mobile trunks can
be selected directly when you are configuring the routes settings.
Procedure
1. Navigate to Gateway > Mobile List > Mobile Group, click Add New Mobile Group.
2. Enter a name in the Group Name field.
3. Select an outgoing Strategy for the group of mobile trunks.
If you apply the mobile group on one IP to Mobile route, the system will choose a mobile trunk to
To Next Page
Loading...
Need help?
General
