TG Series User Guide
44/86
Prepend: define digits added before a callback number before the callback is placed.
5. Click Save and Apply Changes.
AutoCLIP Route
Yeastar TG gateway can automatically stores records of failed outgoing call to AutoCLIP route table.
When the called person calls back, TG gateway will route the call directly to the original caller's
extension.
Set up AutoCLIP Route
Procedure
1. Navigate to Gateway > Routes Settings > AutoCLIP Settings.
2. Set Enable to Yes.
3. (Optional) Change the Record Keep Time. The system will keep the AutoCLIP records for the
configured time.
4. (Optional) Change the value of Digit Match. Adjust the setting if the incoming caller ID has a
prefix "+","0" or others.
5. Click Save and Apply Changes.
Delete AutoCLIP Records
If you don’t want to route the incoming call to the original user, you can delete the AutoCLIP record.
The next time, when the called person calls back TG gateway, the call will not be routed to the
original user.
Procedure
1. Navigate to Gateway > Routes Settings > AutoCLIP Settings.
2. Select the desired AutoCLIP record, click .
To Next Page
Loading...
Need help?
General
