YOKOGAWA DL9000 Series User Manual

10-42
IM 701310-01E
• Setting a Calculation
32.
Press the Calc soft key.
33.
Use the rotary knob and SET to select the calculation number from Calc 1 to
Calc 4.
34.
Use the rotary knob and SET to select the expression box to the right of the
selected number.
The dialog box for entering the calculation appears.
35.
Use the rotary knob and SET to select functions and operators.
You can enter numbers using the numeric keys.
36.
When you are done entering the expression, press the Enter soft key. To cancel
the entered expression, press ESC.
The dialog box closes, and the screen for selecting the calculation number reappears.
37.
Press ESC to return to the previous screen.
If you select Marker in step 28, proceed to step 38.
If you select Peak in step 28, proceed to step 42.
Marker
Peak
Analyzing by Using Markers (when Measure is set to Marker)
38.
Press the F1 Position soft key.
39.
Use the rotary knob to move the F1 cursor.
40.
Press the F2 Position soft key.
41.
Use the rotary knob to move the F2 cursor.
Setting the Peak Analysis Time Range (when Measure is set to Peak)
42.
Press the Peak1 soft key.
43.
Use the rotary knob to set the Peak1 start point (T1) and end point (T2).
Press the soft key to select the point that you want to set using the rotary knob.
44.
Press the Peak2 soft key.
45.
Use the rotary knob to set the Peak2 start point (T1) and end point (T2).
Press the soft key to select the point that you want to set using the rotary knob.
T1
T2
T1
T2
When Marker is selected When Peak is selected
10.7 Performing FFT Analysis

YOKOGAWA DL9000 Series Specifications

General

Brand	YOKOGAWA
Model	DL9000 Series
Category	Test Equipment
Language	English