13-37
IM 701310-01E
Saving and Loading Measurement Data
3
2
1
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
App
Index
Explanation
Files To Be Moved/Copied
Highlighted files can be copied or moved. There are two ways to select the files to be
copied or moved.
• Selecting the files one at a time
Press the Set soft key to select files one at a time.
• Selecting all files at once
Press the Select
All soft key to select all files.
Selecting a file or directory and pressing the Select All soft key selects every file and
directory in the directory containing the selected file or directory.
Specifying the Files to Be Displayed in the File List Dialog Box
See the explanation “Specifying the Files to Be Displayed in the File List Dialog Box” in
section 13.4.
Note
• If an error occurs while copying/moving multiple files, the files after the error occurrence are
not copied/moved.
• You cannot copy/move files if files with the same file name exist at the copy/move
destination.
• You cannot copy/move the same files to another directory after copying/moving the files.
Select the files to be copied again and then copy them.
•
A total of 2500 directories and files can be displayed in the file list. If there are more than
2500 directories and files in a single directory, a total of 2500 files and directories will be
displayed, but it is not possible to specify which directories and files are displayed.
13.11 Copying/Moving Files
To Next Page
Loading...
Need help?
General
