Zebra TC52 Series User Manual

Application Deployment
172
Downloading the Enterprise Reset Package
1. Go to the Zebra Support & Downloads web site, www.zebra.com/support.
2. Download the Enterprise Reset file to a host computer.
Performing an Enterprise Reset Using microSD Card
1. Copy the Enterprise Reset zip file to the root of the microSD card.
• Copy the zip file to a microSD card using a host computer (see USB Communication for more
information) and then installing the microSD card into the device (see Replacing the microSD Card
for more information).
• Connect the device with a microSD card already installed to the host computer and copy zip file to
the microSD card. See USB Communication for more information. Disconnect the device from the
host computer.
2. Press and hold the Power button until the menu appears.
3. Touch Restart.
4. Press the Volume Up and Volume Down buttons to navigate to apply from sdcard.
5. Press the Power button.
6. Press the Volume Up and Volume Down buttons to navigate to Full OTA Package or Diff OTA
Package.
7. Press the Power button.
8. Press the Volume Up and Volume Down buttons to navigate to the System Update file.
9. Press the Power button. The System Update installs and then the device returns to the Recovery
screen.
10. Press the Power button to reboot the device.
11. Touch OK. The device resets.
12. Press and hold the PTT button until the device vibrates. The System Recovery screen appears.
13. Press the Volume Up and Volume Down buttons to navigate to apply from sdcard.
14. Press the Power button.
15. Use the Volume Up and Volume Down buttons to navigate to Full OTA Package.
16. Press the Power button.
17. Use the Volume Up and Volume Down buttons to navigate to the Enterprise Reset file.
18. Press the Power button. The Enterprise Reset occurs and then the device returns to the Recovery
screen.
19. Press the Power button to reboot the device.
Performing an Enterprise Reset Using ADB
1. Connect the device to the Rugged Charge/USB cable or insert the device into the 1-Slot USB/Charge
Only Cradle.
2. Connect the cable or cradle to the host computer.
3. Go to Settings.
MN-003834-01ENa_tc52-android-10-ug-en.book Page 172

Zebra TC52 Series Specifications

General

Brand	Zebra
Model	TC52 Series
Category	Handhelds
Language	English