Zeiss EVO - Page 60

5 First Operating Steps | 5.3 Starting the Software ZEISS
Shortcut Function
<F4> Step to next Magnification Table entry, or Undo Centre Feature Mag-
nification
<F4 + CTRL> Step to previous Magnification table entry
<F4 + SHIFT> Exit from Magnification Table mode
<F5>, <F5 +
SHIFT>
<F6>, <F6 +
SHIFT>
<F7>, <F7 +
SHIFT>
<F8>, <F8 +
SHIFT>
User defined macros
<F9> Keys help (displays this information)
<F11>, <F11 +
SHIFT>
User defined macros
<F12>, <F12 +
SHIFT>
Aborts Stage Movement
<TAB> Toggle coarse/fine
<CTRL + TAB> Performs Centre Point
<CTRL + SHIFT +
TAB>
Performs Centre Feature
<HOME> Resets Beam Shift to zero
<SCROLL LOCK> Toggles Freeze/Unfreeze
<PAUSE> Causes currently executing macro to continue
<*> Performs Find Image function
<CTRL + 2> Loads Second Image Window from display
<CTRL + A> Switches Annotation panel ON
<CTRL + B> Display Toolbar View dialog
<CTRL + D> Toggle Data Zone ON/OFF
<CTRL + E> Calls the Export TIFF dialog
<CTRL + F> Starts Auto Focus fine
<CTRL + SHIFT +
F>
Starts Auto Focus coarse
<CTRL + G> Switches SEM Controls Panel ON
<CTRL + I> Switches SEM Status Panel ON
<CTRL + M> Switches to Annotation and inserts Point to Point Marker
<CTRL + ALT + M> Enable/Disable the Movable Crosshairs Marker
<CTRL + ALT + F> Enable/Disable Mouse Following for Movable Crosshairs Marker
60 Instruction Manual ZEISS EVO | en-US | Rev. 10 | 354706-0780-006