980-001-0210G NetPath 100 User’s Manual - Installation Guide A-1
June
1999
Appendix
Fault & Test
Screen
Displays
NetPath 110 screen displays include status fields which indicate Fault and/or Test con-
ditions that relate to the selected screen. These fields are indicated on the screens by a
title such as “System Test/Fault”. After the tiltle, the highest priority fault or test cur-
rently active is displayed, if any.
This section provides a list of entries for the Status, Fault or Test which may appear for
each Title. The entries are listed in tables in the order of highest priority-first. Priority
levels are separated by a solid line between rows. Entries having the same priority level
are separated by dotted lines between rows.
The tables are presented by title (screen field) in alphabetical order.
They are as follows:
•
Active Test
•
Device Fault
•
DSX Port Fault
•
External Set Test
•
Frame Fault
•
ISDN (Backup, User Ckt)
•
ISDN (On-Dmd Port)
•
Line n/Bn (ISDN)
ISDN Connection Cause Codes
ML-PPP Connection Codes
•
Modem Status, Fault
•
Network Port Fault
•
System Test/Fault
•
Test/BKP (CSU)
•
Test/BKP (DSX)
To Next Page
Loading...