Zhone 100 - Statistics Summary and History; CSU Statistics

5 Diagnostics
980-001-0210G NetPath 100 User’s Manual - Installation Guide 5-7
June
1999
Statistics
NetPath 100 provides current and historical performance statistics for the following:
•
CSU interface
•
CSU and Frame Relay Traffic (in summary and on a per-PVC basis)
•
Protocol Monitor basis
CSU and Frame Manager statistics are accumulated in 15-minute intervals for the last
24 hours. PVC and Protocol monitoring statistics are accumulated in user-defined in-
tervals (1 - 15 minutes).
CSU Statistics
Summary
The CSU Statistics Summary screen provides summary performance information and
access to detailed performance history displays.
The CSU Statistics Summary screen is accessed from the System View screen, select-
ing [CS] by typing “CS” followed by ENTER.
The CSU Statistics Summary screen is shown in Figure 5-5.
Figure 5-5 CSU Statistics Summary Screen
S
y
stem
Test / Fault:
Highest priority Test or Fault causing disruption of the data path.
Hi
g
h S
p
eed Interface Status
-
DTR:
State of DTR lead, when Power is being detected from the DTE.
States are: ON, OFF or (blank) if Power OFF.
RTS:
State of RTS lead, when Power is being detected from the DTE.
States are: ON, OFF or (blank) if Power OFF.
Power:
ON or OFF based on sensing voltage on Tx data lead(s) from the DTE.
**************************** CSU Statistics Summary ****************************
Name: F@43802
System High Speed Interface Status
Test/Fault: DTR: On
RTS: On
Power: On
T1 ID: NONAME
Current 24Hr Total
Interval Count 419 secs 96 valid
Rx Tx Rx Tx
Error Free Sec(%) 100 100 100 100
Availability(%) 100 100 100 100
Bipolar Violations 0 0
------------- RX ------------ -TEST/(*=Bkp)- ------------- TX ------------
ES SES UAS BES LOFC ES SES UAS BES CSS
Curr: 600 600 600 600 600 / 600 600 600 600 600
24Hr: 65000 65000 900 900 900 NetwSetLine /* 65000 900 900 900 900
ResetStats[RS] ViewHistory[VH current_time(optional)]
Help[?] Close[X] AutoUpdate[AU]
>