Zhone 100 - Key Operating Features; Management Access Methods; Password Security Levels

2 Description
2-6 NetPath 100 User’s Manual - Installation Guide 980-001-0210G
June
1999
Operating
Features
This section contains operation information about the following:
•
Management Access
•
Software Download
•
Trap Reporting
•
Modem & Call Director
Management
Access
Management access for control sessions or to retrieve alarm status is provided to the
NetPath 100 via in-band Telnet, dial-in VT-100 console connection or direct-connect-
ed VT-100 terminal. NetPath 100 also supports SNMP “Get,” “Get Next,” and “Set”
commands for retrieval of configurations and statistics information.
Password Security
Security is provided through five levels of password-protected access.
Level 1, System Access Password:
Allows access to system login via User Access Passwords.
Levels 2 - 5, User Access Passwords:
View - Allows user to display all screens.
Test - Allows user to perform diagnostic tests from Status / Test screens and
allows View password access.
Configuration - Allows user to change operating parameters and allows Test
password access.
Supervisor - Grants unlimited access including the viewing and changing of
passwords.
System Screen
Displays
Once successfully logged in, the system provides screen displays for configuration,
testing, and performance statistics. Help text describing each screen’s display fields
and commands are also provided.