Zhone 100 - Table 1-11 Modem Status, Fault; Table 1-12 Network Port Fault

Appendix
980-001-0210G NetPath 100 User’s Manual - Installation Guide A-11
June
1999
Modem Status,
Fault
Modem Status shows the highest priority internal modem related fault currently detect-
ed. This is displayed on the System View screen.
Network Port
Fault
DSX Port Fault shows the highest priority Network Port fault currently detected. This
is displayed on the System View, CSU / DSX Statistics Summary, Device Status / Test,
Frame Manger Statistics Summary and ISDN Status / Test screens.
Table 1-11 Modem Status, Fault
Displa
y
Description
Modem Failure Failure of Modem hardware detected by the unit.
Dial Line Failure Failure of routine Dial Line test detected.
Table 1-12 Network Port Fault
Displa
y
Description
CSU Fault Failure of CSU related hardware detected by the unit.
CSU CFA/Red Alarm Detected loss of T1 facility.
CSU Rmt/Yellow Alarm Carrier alarm notification that Transmit failure from this DCE has been detected on
this T1 facility.
CSU AIS/Blue Alarm Carrier alarm notification that an upstream signal failure has been detected on this T1
facility.
CSU Threshold Alarm Link Error Threshold reached or exceeded.