Appendix
980-001-0210G NetPath 100 User’s Manual - Installation Guide A-7
June
1999
ISDN
(On-Dmd Port)
ISDN shows the highest priority ISDN On-Demand related fault, test or status current-
ly detected. This is displayed on the System View screen.
Table 1-7 ISDN
(On-Demand Port)
Displa
Description
ISDN Adapt Fault The ISDN hardware has failed (call cannot be accomplished)
Connecting On-Demand connection in place using Primary Dials.
Failed On-Demand connection in place using Secondary Dials.
Loop to User On-Demand connection in place using Primary Dials, but with fewer ISDN
connections than configured for.
Online Call/Lp On-Demand connection in place using Secondary Dials, but with fewer ISDN
connections than configured for.
Primary On Line Connection is being established.
Secondary On Line Retry attempts exhausted.
Primary Dwn Spd The ISDN line of at least one B-Channel is faulty (call may not be possible).
Secondary Dwn Spd An invalid or incorrect SPID has been entered for at least one B-Channel (call may not
be possible).
Connecting A B2-Channel cannot operate due to a SPID failure on its associated B1-Channel.
Failed “Service Disable” has been selected on the “ISDN Status / Test” screen.
ISDN Line Failure “Time Disable” has been selected on the “ISDN Status / Test” screen.
ISDN SPID Failure LoopUp connection in place on any assigned B-Channel.
B1 SPID Failure Default state if not disabled and no failure exists.
Armed The ISDN hardware has failed (call cannot be accomplished)