1 Preface
1-6 NetPath 100 User’s Manual - Installation Guide 980-001-0210G
June
1999
Rev. 5.01.xx from Rev. 4.01.xx
•
Added - Loop to User operator command, for ISDN Data port.
•
Added - Call Out / Loop Test to ISDN Demand Tests.
•
Added - Separate traps for PVC Availability and Unavailability.
•
Added - Current CIR rate per PVC to PVC Statistics Screen display.
•
Added - ML-PPP option for ISDN BOD bundling (2 B-Channels.)
•
Added - Display of Cause Codes for ISDN connection failure.
Download Notes
Downloading Revision 5.01.xx software to a NetPath 100 unit currently running with
a prior version may result in some configuration changes which will have to be re-
stored (via remote management accessed reconfiguration). Specific configuration
items affected are:
•
Delay monitoring for all PVCs will be turned OFF if previously configured for
Delay monitoring.
•
Protocol Monitoring selections may be mis-mapped (different protocols
selected) if previously configured for Protocol monitoring.
Rev. 4.01.xx from Rev. 3.01.xx
•
Added - Tunneled option for WAN management PVC, including configuration
by DLCI DIP Switches.
•
Added - Message Segmentation support for management traffic and
configurable maximum message size (MTU).
•
Added - Asynchronous LMI support.
Download Notes
Downloading Revision 4.01.xx software to a NetPath 100 unit currently running with
a prior version may result in some configuration changes which will have to be re-
stored (via remote management accessed reconfiguration). Specific configuration
items affected are:
•
Delay monitoring for all PVCs will be turned OFF if previously configured for
Delay monitoring.
•
Protocol Monitoring selections may be mis-mapped (different protocols
selected) if previously configured for Protocol monitoring.
To Next Page
Loading...