SC800 User Manual
Page | 99 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Method 2 (When there is not a super admin):
If the network of the device is normal and ZKBio Access IVS / ZKBioTime 8.0 has
been connected, you can reset the password by sending the super admin
account and password from the server.
1. Click Personnel > Person > New on the ZKBio Access IVS / ZKBioTime 8.0
Server; register the super admin information and set the super admin role
on the new interface as required.
2. After registering the information of the super admin, click Save and New.
3. Click Access > Device > Control > Synchronize All Data to Devices to
synchronize all the data to the device including the new users.
Note: For other specific operations, please refer ZKBio Access IVS User Manual or
ZKBioTime8.0 User Manual.
4. After the data synchronization is successful, you can reset the password
with the newly registered super admin. The operation steps are the same as
method 1.
To Next Page
Loading...
