SC800 User Manual
Page | 53 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Function Description
Function Name Description
Security Mode
Select whether to enable the security mode to
protect the device and the user's personal
information. You can set the device to work
offline and hide the user's personal information
to prevent leakage during user verification.
Standalone
Communication
To avoid being unable to use when the device is
offline, you can download the C/S software
(such as ZKAccess 3.5) on your computer in
advance for offline use.
SSH
SSH is used to enter the background of the
device for maintenance.
User ID Masking
When enabled, and then the user is successfully
compared and verified, the User ID in the
displayed verification result will be replaced
with an * to achieve secure protection of
sensitive private data.
Display Verification
Mode
Set whether to display the verification mode in
the verification result interface.
Factory Reset 9.6
The Factory Reset function restores the device settings such as communication
settings and system settings, to the default factory settings (this function does
not clear registered user data).
Tap Reset on the System interface and then tap OK to restore the default
To Next Page
Loading...
Need help?
General
