ZKTeco SC800 User Manual

SC800 User Manual
Page | 45 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Wiegand50
ESSSSSSSSSSSSSSSSCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCO
It consists of 50 bits of binary code. The 1
st
bit is the
even parity bit of the 2
nd
to 25
th
bits, while the 50
th
bit
is the odd parity bit of the 26
th
to 49
th
bits. The 2
nd
to
17
th
bits is the site codes, and the 18
th
to 49
th
bits are
the card numbers.
"C" denotes the card number; "E" denotes the even parity bit; "O" denotes
the odd parity bit.
"F" denotes the facility code; "M" denotes the manufacturer code; "P"
denotes the parity bit; and "S" denotes the site code.
8.6.2 Wiegand Output
Function Description
Function Name Description
Wiegand Format
Its value can be 26 bits, 34 bits, 36 bits, 37 bits,
and 50 bits.
Wiegand Output Bits
After selecting the required Wiegand format,
select the corresponding output bit digits from
the Wiegand format.

ZKTeco SC800 Specifications

General

Brand	ZKTeco
Model	SC800
Category	IP Access Controllers
Language	English