ZKTeco SC800 User Manual

SC800 User Manual
Page | 14 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Standby Interface 4.2
The device uses a 2.4-inch color screen, which all operations are performed
through hidden touch keypad. (Note: The device only supports the input of
numbers, other characters such as English and symbols can be synchronized by
the software down.) Before getting into the device features and functions, it is
recommended to be familiar with the below fundamentals.
After connecting the power supply, the following standby interface is
displayed:
 Enter any number to access the User ID input interface.
 When there is no Super Administrator set in the device, tap M/OK to go to
the menu.

ZKTeco SC800 Specifications

General

Brand	ZKTeco
Model	SC800
Category	IP Access Controllers
Language	English