ZKTeco SC800 User Manual

SC800 User Manual
Page | 16 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Note: The punch state options are disabled by default, and you must select
other mode options in the "Punch States Options" section to see them on the
standby screen.
Verification Mode 4.3
4.3.1 Card Verification
 1: N Card Verification Mode:
The 1:N Card Verification Mode compares the card number in the card
induction area with all the card number data registered in the device; The
following is the card verification screen:
 1:1 Card Verification Mode:
The 1:1 Card Verification mode compares the card number in the card
induction area with the number associated with the employee's User ID
registered in the device.
Enter the user ID and tap M/OK to enter the 1:1 card verification mode.

ZKTeco SC800 Specifications

General

Brand	ZKTeco
Model	SC800
Category	IP Access Controllers
Language	English