SC800 User Manual
Page | 77 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
deleted but can be modified.
2. A number cannot be modified again after being set.
3. When the holiday is set to be valid, the personnel in a group can open the
door only when group time period overlaps with the holiday time period.
4. When the holiday is set to be invalid, the access control time of the
personnel in this group is not affected by holidays.
Edit Group:
On the All Group interface, tap to select the access group item to be modified.
Tap Edit to modify group parameters.
Delete a Group:
On the All Group interface, select a access group item to be deleted and tap
Delete. Tap M/OK to confirm the deletion. After deletion, this group does not
display on the All Group interface.
Combined Verification 12.5
Access groups are arranged into different door-unlocking combinations to
achieve multiple verifications and strengthen security.
In a door-unlocking combination, the range of the combined number N is 0 ≤ N
≤ 5 and the number of members N may all belong to one access group or may
belong to five different access groups.
Tap Combined Verification on the Access Control interface to configure the
combined verification setting.
To Next Page
Loading...
Need help?
General
