ZKTeco SC800 User Manual

SC800 User Manual
Page | 108 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Function Name Description
Volume
Adjust the volume of the device which can be
set between 0 and 100.
Language
Select the language of the WebSer
ver and
device.
User ID Masking
When enabled, and then the user is successfully
compared and verified, the User ID in the
displayed verification result will be replaced
with an * to achieve
secure protection of
sensitive private data.
Display Verification
Name
Set whether to display the username in the
verification result interface.
Display Verification
Mode
Set whether to display the verification mode in
the verification result interface.
Note:
1. After selecting the language and clicking Confirm, the device will
automatically reboot and display the changed language.
2. Then, until the device reboots and logs in again, WebServer will not display
the changed language.
Serial Comm 19.11
Click Serial Comm on the WebServer.

ZKTeco SC800 Specifications

General

Brand	ZKTeco
Model	SC800
Category	IP Access Controllers
Language	English