ZKTeco SC800 User Manual

SC800 User Manual
Page | 29 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
enrolled" appears. The registration interface looks like this:
6.1.4 Password
Tap Password in the New User interface to enter the password registration
page.
 On the Password interface, enter the required password and re-enter to
confirm it and tap M/OK.
 If the re-entered password is different from the initially entered password,
then the device prompts the message as "Password not match!", where
the user needs to re-confirm the password again.
 The password may contain 6 to 8 digits by default.
6.1.5 Access Control Role
The Access Control Role sets the door access privilege for each user. It includes
the access group, verification mode and time period

ZKTeco SC800 Specifications

General

Brand	ZKTeco
Model	SC800
Category	IP Access Controllers
Language	English