SC800 User Manual
Page | 38 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Baudrate
It is the identification number of the device, which
ranges between 1 and 254.
If the communication method is RS485, you need to
input this device ID in the
interface.
Wi-Fi Settings 8.4
The device provides a Wi-Fi module, which can be built-in within the device
module or can be externally connected.
The Wi-Fi module enables data transmission via Wi-Fi (Wireless Fidelity) and
establishes a wireless network environment. Wi-Fi is enabled by default in the
device. If you don't need to use the Wi-Fi network, you can toggle the Wi-Fi to
disable the button.
Tap Wi-Fi Settings on the Comm. Settings interface to configure the Wi-Fi
settings.
Searching the Wi-Fi Network
WIFI is enabled in the device by default. Toggle the button to
enable or disable WIFI.
Once the Wi-Fi is turned on, the device will search for the available Wi-Fi
within the network range.
Tap on the required Wi-Fi name from the available list and input the correct
To Next Page
Loading...
Need help?
General
