ZKTeco SC800 User Manual

SC800 User Manual
Page | 40 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
 Advanced Setting
On the Wi-Fi Settings interface, tap on Advanced to set the relevant
parameters as required.
Function Description
Function Name Description
DHCP
Dynamic Host Configuration Protocol (DHCP)
dynamically allocates IP addresses to network clients. If
the DHCP is
enabled, then the IP cannot be set
manually.
IP Address
The IP address for the Wi-Fi
network, the default is
0.0.0.0. It can be modified according to the network
availability.
Subnet Mask
The default Subnet Mask of the Wi-Fi
network is
255.255.255.0. It can be modified according to the
network availability.
Gateway
The Default Gateway address is 0.0.0.0. It can be
modified according to the network availability.
Cloud Server Settings 8.5
Tap Cloud Server Settings on the Comm. Settings interface to connect with
the ADMS server.

ZKTeco SC800 Specifications

General

Brand	ZKTeco
Model	SC800
Category	IP Access Controllers
Language	English