SC800 User Manual
Page | 74 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Specify the start and the end time, and then tap M/OK.
Note:
1. The door is inaccessible for the whole day when the End Time occurs
before the Start Time (such as 23:57 to 23:56).
2. It is the time interval for valid access when the End Time occurs after the
Start Time (such as 08:00 to 23:59).
3. The door is accessible for the whole day when the End Time occurs after
the Start Time (such that Start Time is 00:00 and End Time is 23:59).
4. The default Time Zone 1 indicates that the door is open all day long.
Holidays 12.3
When there is a holiday, you may need a different access time; however,
altering everyone's access time one by one is extremely time-consuming. thus,
a holiday access time that applies to all workers can be set, and the user will be
able to open the door during the holidays.
Tap Holidays on the Access Control interface to set the holiday access.
To Next Page
Loading...
Need help?
General
