SC800 User Manual
Page | 73 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Time Rule Settings and Time Schedule 12.2
Tap Time Rule Settings and Time Schedule on the Access Control interface
to configure the time settings.
The entire system can define up to 50 Time Periods.
Each time-period represents 10 Time Zones, i.e., 1 week and 3 holidays,
and each time zone is a standard 24 hour period per day and the user can
only verify within the valid time-period.
One can set a maximum of 3 time periods for every time zone. The
relationship among these time-periods is "OR". Thus, when the
verification time falls in any one of these time-periods, the verification is
valid.
The Time Zone format of each time-period is HH MM-HH MM, which is
accurate to minutes according to the 24-hour clock.
Tap the grey box to search the required Time Zone and specify the required
Time Zone number (maximum up to 50 zones).
On the selected Time Zone number interface, tap on the required day (that is
Monday, Tuesday, etc.) to set the time.
To Next Page
Loading...
Need help?
General
