ZKTeco SC800 - Update Firmware

SC800 User Manual
Page | 113 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Device Management 19.14
Click Device Management on the WebServer.
Function Name Description
Clear Administrator
Choose whether to c
hange the super
administrator into a normal user.
Restart
Choose whether to restart the device.
Reset
The Reset function restores the device settings
such as communication and system settings to
the default factory settings (this function does
not clear registered user data).
Note: After reset, the IP of the device is restored
to the original 192.168.1.201, p
lease refer to
Communication Settings to modify the IP.