SC800 User Manual
Page | 36 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Function Description:
Function Name Description
IP Address
The default IP address is 192.168.1.201. It can be
modified according to the network availability.
Subnet Mask
The default Subnet Mask is 255.255.255.0. It can be
modified according to the network availability.
Gateway
The Default Gateway address is 0.0.0.0. It can be
modified according to the network availability.
DNS
The default DNS address is 0.0.0.0. It can be modified
according to the network availability.
TCP COMM. Port
The default TCP COMM Port value is 4370. It can be
modified according to the network availability.
DHCP
Dynamic Host Configuration Protocol dynamically
allocates IP addresses for clients via server.
Display in Status
Bar
Toggle to set whether to display the network icon on
the status bar.
Serial Comm 8.2
Serial Comm function establishes communication with the device through a
serial port (Master Unit/OSDP Output).
Tap Serial Comm. on the Comm. Settings interface.
To Next Page
Loading...
Need help?
General
