SC800 User Manual
Page | 95 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
19 Connect to WebServer
Login WebServer 19.1
According to the configured network login, allows the Webserver to remotely
view the information of the device (hardware, software, capacity and data, etc.),
set up the system (communication, access control and system functions, etc.),
add users and upgrade the system.
1. Open a browser and enter the address to log in to the WebServer; the
address is https:// Serial IP Address:1443. For example:
https://192.168.1.201:1443.
To Next Page
